Fyne Audio F1-5 Loudspeakers

£4,000.00

  • Fyne Audio F1-5 Loudspeaker
  • 5 inch IsoFlare Drive Unit
  • On Demonstration Now
  • Trade in Welcome
SKU: 3403582121 Categories: , Tag:

Description

Fyne Audio F1-5 Loudspeakers

The F1-5 is the smallest speaker in Fyne’s flagship F1 Series.

It is quite a bit a more compact than its bigger brother the F1-8 and is better suited in a smaller room, it uses a 5 inch IsoFlare drive and the cabinet is 321 mm tall x 186 mm wide x 289 mm deep, but due to the BassTrax diffuser on the underside of the cabinet it isn’t difficult to integrate into a room and it is very flexible over positioning.

The F1-5 is cut from the same as cloth as the rest of the F1 Series, the same technology and expertise is employed here, albeit into a much smaller stand mount format.

The hand crafted cabinet is supported on a machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the IsoFlare low frequency drive unit is 5 inches in diameter (125mm) and is mated to a 19mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum.

As with all of the F1 models the F1-8 are designed, hand built and hand finished at Fyne Audio’s UK manufacturing facility and the lacquered burr walnut finish of all of the F1 really makes them stand out, it is a stunning finish and for the money the level of performance on offer here is quite something.

The dedicated stands are £1100 per pair

Specification

System Type 2 way, downwards firing port, with BassTrax Tractrix diffuser*
Recommended amplifier power (Watt RMS) 30 – 100
Peak power handling (Watt) 200
Continuous power handling (Watt RMS) 50
Sensitivity (2.83 Volt @ 1m) 87dB
Nominal impedance 8 Ohm
Frequency response (-6dB typical in room) 48Hz – 38kHz
Drive unit complement 1 x 125mm IsoFlare point source driver, multi-fibre bass/ midrange cone, FyneFlute surround with 19mm magnesium dome compression tweeter, neodymium magnet system
Crossover frequency 1.9kHz
Crossover type Single wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated
System adjustments Presence (2.5kHz – 5.0kHz) +/- 3dB
Dimensions – HxWxD 321 x 186 x 289mm (12.6 x 7.3 x 11.4”)
Weight – Each 5.7kg (12.6lbs)
Finishes Piano Gloss Walnut

You may also like…