Fyne Audio F1-8 Loudspeakers


  • Fyne Audio F1-8 Loudspeaker
  • 8 inch IsoFlare Drive Unit
  • On Demonstration Now
  • Trade in Welcome
SKU: 340358299 Categories: , , Tag:


Fyne Audio F1-8 Loudspeakers

The F1-8 is larger of the 2 standmount speakers from the F1 Series

It is a substantial stand mount speaker with it’s 8 inch IsoFlare drive and the cabinet is 470mm tall x 280 mm wide x 441 mm deep, but due to the BassTrax diffuser on the underside of the cabinet it isn’t difficult to integrate into a room and it is very flexible over positioning.

The F1-8 is cut from the same cloth as the 2 large floorstanding models, (the F1-10S and F1-12S), the same technology and expertise is employed here, albeit into a smaller standmount format.

The hand crafted cabinet is supported on a machined aluminium plinth that houses Fyne’s state of the art BassTrax LF diffuser. Surrounded by FyneFlute rubber surround, the IsoFlare low frequency drive unit is 8 inches in diameter (200mm) and is mated to a 25mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum.

As with all of the F1 models the F1-5 are designed, hand built and hand finished at Fyne Audio’s UK manufacturing facility and the lacquered burr walnut finish of all of the F1 really makes them stand out, it is a stunning finish and for the money the level of performance on offer here is quite special.

The dedicated stands are £1100 per pair

Part Exchange is welcome if you have a pair of speakers to move on


System Type 2 way, downwards firing port, with BassTrax Tractrix diffuser*
Recommended amplifier power (Watt RMS) 30 – 180
Peak power handling (Watt) 360
Continuous power handling (Watt RMS) 90
Sensitivity (2.83 Volt @ 1m) 91dB
Nominal impedance 8 Ohm
Frequency response (-6dB typical in room) 33Hz – 34kHz
Drive unit complement 1 x 200mm IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite magnet system
Crossover frequency 1.8kHz
Crossover type Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated
System adjustments Presence (2.5kHz – 5.0kHz) +/- 3dB
Dimensions – HxWxD 470 x 280 x 441mm (18.5 x 11.0 x 17.4”)
Weight – Each 15.2kg (33.5lbs)
Finishes Piano Gloss Walnut

You may also like…