Plixir Elite BDC 12v 2 Amp Power Supply

The PLiXiR Elite BDC balanced DC power supply is designed to reduce all the noise types present in a DC power supply. Upon deep studies it is apparent that traditional DC power supply circuit cannot eliminate them all.  These include Ground loop current and diode rectification/pollution noise.

This Plixir Power Supply is 12V 2 amps has a single outlet on the rear for powering one device. It can be used to power many different devices such as a Melco N100, Melco S100, Melco D100.  When replacing the basic 12V DC supply that comes in the box with an N100 or S100 the step up in performance is quite obvious.

Plixir’s ground-up approach begins with a balanced AC power design, along with a two-stage voltage regulation consisting of an open-loop first-stage pre-regulator and a close-loop feedback second stage. Their unique balanced AC power circuit effectively removes ground loop noise and reduces the diode noise.

The first stage pre-regulation filters the bulk of the noise, specifically the high-frequency noise, and the heat from the second stage voltage regulator. The 2 stage regulation design as a “gate” to prevent the downstream noise from crossing back to the AC power hands.