HomeProductsShunyata Research Gamma S/PDIF Digital Cable

Shunyata Research Gamma S/PDIF Digital Cable

SKU: 69434911k

HomeProductsShunyata Research Gamma S/PDIF Digital Cable

Shunyata Research Gamma S/PDIF Digital Cable

SKU: 69434911k

  • Gamma S/PDIF Digital Cable
  • Entry Level Model
  • RCA to RCA
  • 1m Long
  • Free UK P&P

£300.00

The Audio Therapy take...

Shunyata Research Gamma S/PDIF Digital Cable

The Gamma is Shunyata’s entry level S/PDIF cable replacing the Venom, it is priced at £300 for a 1m length. If a longer length is required increments of 25cm cost £25.00

Terminated RCA to RCA.

Gamma signal and digital cables are made with the finest conductors available. Single-crystal, continuous cast Ohno copper is an ultra-pure conductor normally found in far more expensive cables. Ohno conductors are extruded using Shunyata Research’s exclusive PMZ (Precision Matched Impedance) process. This extrusion method tightens the tolerances of the conductor surfaces, dielectric extrusions, and the precision of the braided shield. All are held to minute tolerances. The extrusion and braiding machines must be run at one-quarter speed during the manufacturing process. Finally, all Gamma cables are conditioned for 4 days using advanced Kinetic Phase Inversion Process (KPIP v2™).

Gamma cables sound very natural, but are surprisingly agile, athletic and entirely unforced with regard to expressing frequency extension, timing, weight and authority in the low octaves. Gamma cables do all of this without calling attention to themselves, allowing the purity of the sound to take centre stage.

KPIP v2™ PROCESSING

Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP v2™ processing which refines conductor metals at a molecular level. This dramatically reduces burn-in time and significantly improves sonic performance, delivering a relaxed and life-like presentation. When compared to the original process, KPIP v2™ represents a dramatic performance upgrade on par with a component-level upgrade.

Cable Type: Coaxial

Conductors: OCC copper (Ohno Continuous Cast)

Shield: SPC braided shield

Dielectric: Fluorocarbon

Connectors: Gold plated brass contacts, nickel mirror finish

Characteristic Impedance: 75 ohm

Gauge: 18

Tech: PMZ

KPIP v2 Processing: 4-days

Standard Length: 1.00 meters

Color: Charcoal flex

Safety Assurance:
Continuity and polarity tests – by two technicians
HiPOT tests insulation breakdown @ 1,200 VAC

 

 

You may also like